Author Archive
How To Videos On Car Repair
Posted by: | CommentsFor More Videos Click Here and Watch; www.youtube.com/user/ghosttownhunter#p/u For all the Do It Your selfers out there that would like to know how to repair that special car or truck problem, we offer a quick video Tutorial that can make the job easy and understandable.
This is how it works.
Simply type in a question or request for a video that you would like to see. Then scroll down to the bottom of the page and click on the coffee cup icon and leave a donation of $ 40.00 U.S. Dollars and we will personalize a YouTube video just for you.
If you like this post, buy me a cup of coffee.
Crown Vicroria/ Grand Marguis Intake Manifold Problem and Replacement
Posted by: | CommentsIf any of you happen to own a Crown Victoria or Grand Marguis with the 4.6 between the years of 1995 and 2000 then maybe you have noticed a small ( or in some cases very large ) coolant leak coming from the cross over pipe on the front of the intake manifold. ( Usually on the passenger side )
Well my friends dont think you are the only one out there that is having this problem. This is a very common problem with these vehicles even so much that Ford has placed a campaign or Recall on them but there is a catch.
The biggest problem besides over-heating the engine from lack of engine coolant is the fact that coolant will leak onto the coil packs and can effect the firing of the spark plugs giving you a miss fire or two with a check engine light and a bad headache.
You have to call the dealership with your VIN number to find out if you qualify for the recall and of course there is a time frame for this qualification. ( The VIN number is located on the driver door, trunk lid , door frame or the driver side of the wind shield corner )
But if your like most people, then you will have to have it done yourself and for the DIY people out there, I will give you some insight on how it is done and what to look for.
For starters find a good quality replacement intake manifold. Dorman makes a good intake that costs about $ 230.oo , and it comes with everything ( Brackets ,seals and thermostat included )
To install the new unit is pretty straight forward if you have any kind of repair knowledge but if this is your first one the you should visit this site;
http://www.autoclinix.com/Manifold8.htm
There you will see a very detailed step by step guide with very good pics to help you through the process.
Well I hope this helps all you Ford guys out there and remember to use distilled water with your anti freeze mix.
Until next time this is ASE Master Jeff Williams saying thanks for stopping by and don’t forget to click on the little coffe cup at the bottom left of this page. Your Donations are greatly appreciated. Jeff
